Petroleum coke (often abbreviated pet coke or petcoke) is a carbonaceous solid delivered from oil refinery coker units or other cracking processes. Coking processes that can be employed for making petcoke include contact coking, fluid coking, flexicoking and delayed coking. Other coke has traditionally been delivered from coal.
This coke can either be fuel grade (high in sulfur and metals) or anode grade (low in sulfur and metals). The raw coke directly out of the coker is often referred to as green coke. In this context, "green" means unprocessed. The further processing of green coke by calcining in a rotary kiln removes residual volatile hydrocarbons from the coke. The calcined petroleum coke can be further processed in an anode baking oven in order to produce anode coke of the desired shape and physical properties. The anodes are mainly used in the aluminium and steel industry.
Petcoke is over 90 percent carbon and emits 5 to 10 percent more carbon dioxide (CO2) than coal on a per-unit-of-energy basis when it is burned. As petcoke has a higher energy content, petcoke emits between 30 and 80 percent more CO2 than coal per unit of weight. The difference between coal and coke in CO2 production per unit energy produced depends upon the moisture in the coal (increases the CO2 per unit energy -- heat of combustion) and volatile hydrocarbon in coal and coke (decrease the CO2 per unit energy).
Types of petroleum cokeEdit
There are at least four basic types of petroleum coke, namely, needle coke, honeycomb coke, sponge coke and shot coke. Different types of petroleum coke have different microstructures due to differences in operating variables and nature of feedstock. Significant differences are also to be observed in the properties of the different types of coke, particularly ash and volatile matter contents .
Needle coke, also called acicular coke, is a highly crystalline petroleum coke used in the production of electrodes for the steel and aluminium industries and is particularly valuable because the electrodes must be replaced regularly. Needle coke is produced exclusively from either FCC decant oil or coal tar pitch.
Honeycomb coke This is an intermediate coke, with ellipsoidal pores that are uniformly distributed. Compared to needle coke, honeycomb coke has a lower coefficient of thermal expansion and a lower electrical conductivity .
Fuel grade cokeEdit
Fuel grade coke is classified as either sponge coke or shot coke morphology. While oil refiners have been producing coke for well over 100 years, the mechanisms that cause sponge coke or shot coke to form are not well understood and cannot be accurately predicted. In general, lower temperatures and higher pressures promote sponge coke formation. Additionally, the amount of heptane insolubles present, and fraction of light components in the coker feed contribute.
While its high heat and low ash content make it a decent fuel for power generation in coal fired boilers, petroleum coke is high in sulfur and low in volatile content, and this poses environmental (and technical) problems with its combustion. To meet current North American emissions standards, some form of sulfur capture is required, a common choice of sulfur recovering unit for burning petroleum coke is the SNOX Flue gas desulfurisation technology, which is based on the well-known WSA Process. Fluidized bed combustion is commonly used to burn petroleum coke. Gasification is increasingly used with this feedstock (often using gasifiers placed in the refineries themselves).
Calcined petroleum cokeEdit
Calcined petroleum coke (CPC) is the product from calcining petroleum coke. This coke is the product of the coker unit in a crude oil refinery. The calcined petroleum coke is used to make anodes for the Al, steel and Ti smelting industry. The green coke must have sufficiently low metals content in order to be used as anode material. Green coke with this low metals content is referred to as anode grade coke. The green coke with too high metals content will not be calcined and is used for burning. This green coke is called fuel grade coke.
Desulfurization of petcokeEdit
Petroleum coke is no longer a left-over by-product of “bottom-of-the-barrel” refinery operations whose chief aims are the production of other materials. Petcoke has become a valuable product in its own right, and the demand for high-quality low-sulfur coke is increasing. However, more coke with high sulfur content is being produced, and means whereby such sulfur content is reduced to an acceptable level or eliminated altogether are called for, in particular with the ever-tightening restrictions on sulfur oxides emissions for environmental considerations. The desulfurization of petcoke involves in general the desorption of the inorganic sulfur present in the coke pores or on the coke surface, and the partition and removal of the organic sulfur attached to the aromatic carbon skeleton. The desulfurization techniques proposed fall generally under these headings:
- Solvent extraction
- Chemical treatment
- Thermal desulfurization
- Desulfurization in an oxidizing atmosphere
- Desulfurization in an atmosphere of sulfur-bearing gas
- Desulfurization in an atmosphere of hydrocarbon gases
Storage, disposal, and saleEdit
Nearly pure carbon, petcoke is a potent source of carbon dioxide if burned.
Petroleum coke may be stored in a pile near an oil refinery pending sale. One example, as of 2013, was the large stockpile owned by Koch Carbon near the Detroit River which was produced by a Marathon Petroleum refinery in Detroit which began refining bitumen from the oil sands of Alberta in November 2012. Large stockpiles of petcoke also existed in Canada as of 2013. China and Mexico were markets for petcoke exported from California to be used as fuel. As of 2013 the EPA was declining permits to use petcoke as fuel in the United States but markets existed in India and Latin America where it was used to fuel cement manufacture. As of 2013 Oxbow Corporation, owned by William I. Koch, was a major dealer in petcoke, selling 11 million tons annually.
See also Edit
- Cooler for calcined petroleum coke
- Coke (fuel)
- Delayed coker
- List of CO2 emitted per million Btu of energy from various fuels
- ↑ 1.0 1.1 Petroleum coke on the website of the IUPAC Compendium of Chemical Terminology
- ↑ "Petroleum Coke: The Coal Hiding in the Tar Sands", OilChange International priceofoil.org January, 2013.
- ↑  Hassan Al-Haj Ibrahim, Desulfurization of petroleum coke, Research report, University of Pittsburgh, Pittsburgh, 1990.
- ↑ "SNOX Process: A Success Story", energystorm.us. Cited therein: "Schoolbook, Chemistry 2000, Helge Mygind, ISBN 87-559-0992-2".
- ↑ Desulfurization of Petroleum Coke: A Review, Hassan Al-Haj-Ibrahim and Badie I. Morsi, Industrial and Engineering Chemistry Research, 1992, 31, 1835-1840.
- ↑ Script error
- ↑ Script error
8 Hassan Al-Haj Ibrahim, Desulfurization of petroleum coke, Research report, University of Pittsburgh, Pittsburgh, 1990.
- IUPAC definition of various forms of solid carbon.
- BP info on how calcined petroleum coke is produced